ADD：Floor 3, No.26 East Jinshi Road , Shiling Town, HuaDu District,Guangzhou City,China
Tel：18688409045
Fax：020-86854599
E-mail：13533541245@vip.163.com
| performance parameter | |
| Reading performance | |
| light source | Visible red light, wavelength 632nm |
| optical system | Linear CCD Sensor |
| processor | ARM32-bit |
| resolving power | 1500 |
| Resolution | ≥3mil/0.076mm（PCS90%,CODE 39） |
| Read depth of field | 20mm~470mm |
| Decoding speed | Up to 300 times / second |
| Reading mode | Manual reading, normally on reading, inductive reading, flashing reading and command control |
| Reading angle | Test Conditions：CODE39,10mil/0.25mm,PCS90% |
| Tilt pitch: ± 50 ° | |
| Rotation roll: ± 30 ° | |
| Deflection skew: ± 50 ° | |
| Print contrast | ≥25% |
| Ambient illumination | 0-10000LUX |
| Supported barcode | UPC-A，UPC-E，EAN-8，EAN-13，ISSN，ISBN，Code 128， GS1-128，ISBT 128， Code 39，Code 93，Code 11， Interleaved 2 of 5，Matrix 2 of 5，Industrial 2 of 5，Standard 2 of 5（IATA），Codabar（NW-7），Plessey，MSI Plessey，RSS，China Post，etc. |
| Mechanical / electrical performance | |
| weight | ≤6g |
| size | 22.5mm L * 28.0mm W * 12.3mm H |
| Wire length | USB（USB-KBW/USB-COM）、TTL-RS232、PS2 |
| Interface type | FFC 12pin pitch 0.5 |
| working voltage | DC 3.3-5V |
| electric current | 50mA（work），30mA（Standby） |
| work environment | |
| working temperature | -20℃ to 50℃ |
| Storage temperature | -40℃ to 70℃ |
| Working humidity | 5% to 95%（No condensation） |
| Drop Test | 1.2m, 4 times |
| High and low temperature test | 30 minutes for high Temp., 30 minutes for low Temp., |
| high temperature | 60℃ |
| low temperature | -20℃ |
| Transportation vibration test | 10H@125RPM |
| Accessories list | |
| FFC cable | FFC flexible cable 50mm |
| Development board (optional) | With trigger button and buzzer, with USB or RS232 output function |
| Wire (optional) | USB data cable is used to connect the development board and the host terminal |
| RS232 data cable for connecting development board and host terminal, with power adapter DC connector | |
| PS2 data cable is used to connect the development board and the host terminal | |
| Power adapter (optional) | Output：DC 5V, 1A；Input： AC 100~240V, 50~60Hz |
ADD：Floor 3, No.26 East Jinshi Road , Shiling Town, HuaDu District,Guangzhou City,China
Phone：18688409045
Fax：020-86854599
E-mail：13533541245@vip.163.com
Copyright © Guangzhou SPRTECH Co.,LTD,All Rights Reserved.
备案编号：粤ICP备16061810号
pofung9183